Aperio® AH40 Gen5 1 to 64 Communication Hub

Product description

  • For connection to EAC system via IP/Ethernet connection
  • Allows to connect up to 64 Aperio® devices on a single hub
  • Integrated antenna with the option to mount an external antenna
  • Encrypted radio communication
  • TCP/IP communication encrypted using TLS 1.1/1.2
  • Powered using Power over Ethernet (PoE) or external power supply
  • For standard electrical installation boxes
  • LED for status visualisation
  • Built in tamper switch. Detection of removal from bracket
  • Firmware upgrade via UHF radio or IP network
  • Event Log in the hub

Scope of delivery

  • 1 hub with installation instructions
  • Wall mount bracket
  • Fixing screws to mount hub to wall housing.
Technical data - Aperio® AH40 Gen5 1 to 64 Communication Hub
Approvals: CB, CE, C-Tick, ETL, FCC, IC, ICASA
Safety and Emissions: IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
UL/CSA 62368-1:2014
EN 301 489-1 V2.1.1
EN 301 489-17 V3.2.0
EN 300 328 V2.2.2
EN 50130-4:2011 + A1:2014
EN 62311
FCC 47CFR Part 15 subpart B and subpart C
ISED RSS-247 and ICES-003
AS/NZS 4268
  Power supply: 8-24 VDC or Power over Ethernet (PoE)
Dimension: 82 mm x 82 mm x 37 mm (H x W x D)
Required power supply: PoE: IEEE 802.3af compliant class 1 Powered device (PD) External Power supply: The power supply shall be able to deliver minimum 1.2W. The power supply shall be 3 A over current protected.
Radio standard: IEEE 802.15.4 (2400 – 2483,5MHz), 16 channels (11-26)
Encryption (radio communication): AES 128 bits
Receiver sensitivity: -100 dBm
Wireless operating range: Typical range of 25m depending on building enviroments
Internal antenna: 2 cross polarized dipoles
External antenna: One reverse polarity SMA external antenna connector. AH40 is certified to be used with ASSA ABLOY external antenna AH-ANTENNA-1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3.6 dBi.
Class of protection: IP 20
Operating temperature range: 5°C to 35°C
Relative humidity: < 95% (non-condensing)
Status: LED (red/green/orange)